Soffit and Fascia Replacement Cost in Canada

By Oleksandr Potapenko · 2026-11-16 · How we research prices

Worker replacing aluminum soffit and fascia boards under a roof overhang

Soffit and fascia are the parts of your roof you see every time you walk up to the front door, and the parts you think about least. Soffit is the flat underside of the roof overhang. Fascia is the vertical board at the edge that the eavestroughs hang from. Together they close off the roof edge, keep birds and squirrels out of the attic, and, most importantly, they are half of your attic's breathing system. When they rot, the damage does not stay at the roof edge. It travels into the attic, into the roof deck, and into the insulation, and it arrives as a repair bill several times the cost of the soffit itself.

HomeGuide, in its November 2025 soffit and fascia guide, prices the combined replacement at $9 to $34 per linear foot: fascia alone at $5 to $12 per foot, and soffit alone at $4 to $22 per foot depending on width and material. Angi, in its March 2026 fascia figures cited by industry reporting, puts fascia board replacement at $7 to $22 per linear foot installed, averaging $14.60. This Old House puts fascia labour at $6 to $20 per linear foot. The three sources agree on the shape of the bill and disagree on the edges, because they measure different things: HomeGuide separates the two components, Angi prices fascia as a standalone job, and This Old House prices labour. Converted at roughly 1.40, HomeGuide's combined band becomes about $13 to $48 per linear foot in Canadian dollars, which is wider than the old Canadian source tables. EavesArmour, an Ontario installer, gives a tighter 2026 Canadian picture: soffit only at $3 to $14 per linear foot depending on grade, fascia only at $4 to $18, and a full aluminum eavestrough, soffit and fascia replacement at $4,500 to $8,500 for a typical Ontario home. For a typical house, budget $2,000 to $6,000 for soffit and fascia together, or $15 to $35 per linear foot combined in most Canadian cities. There is no single Canadian national price series for soffit and fascia, so these are estimates from named US and Canadian guides.

The number that matters more than any per-foot price is the ventilation number, and it is the one almost nobody checks. Your attic needs intake air at the soffit and exhaust air at the ridge, and the building code ratio is at least 1 square foot of net free vent area per 150 square feet of attic floor, or 1 per 300 where a vapour barrier is present and the ventilation is balanced. A common vented aluminum soffit panel offers roughly 9 to 11 square inches of net free area per linear foot, which means a house with a 1,500 square foot attic needs about 10 square feet of vent area, split between intake and exhaust, or roughly 130 to 160 linear feet of vented soffit. When a contractor replaces solid soffit with solid soffit, or installs vented panels but blocks them with insulation, the attic stops breathing. Warm, moist air from the house condenses on the cold underside of the deck, the deck rots from the inside, and the next roof replacement discovers damage that the soffit job caused. If your roofer is replacing soffit, ask for the vent calculation in writing: how many square inches of net free area per linear foot, and how many linear feet of vented panel. A contractor who cannot answer is guessing at the most important number in the job.

Material choice is straightforward once you know the trade-offs. Vinyl soffit is cheapest, at $3 to $8 per linear foot for material according to Canadian installer guides, and it never needs painting, but it can crack in deep cold and it sags on wide overhangs. Aluminum is the Canadian standard: $4 to $10 per linear foot for material, it does not rust, it holds its shape, and it comes in vented and solid panels in colours that match the fascia and eavestrough. Wood is the traditional look at $6 to $12 per linear foot for material, but it needs painting every few years and it is the material that rots first when the eavestrough overflows. Fibre cement is the most expensive at $8 to $14 per linear foot, and the most durable, but it is heavy and needs a crew that knows how to cut and fasten it. For fascia, the same ladder applies, with aluminum cladding over wood as the common Canadian compromise: the wood gives structure, the aluminum gives a maintenance-free face. Whatever you choose, the fascia board behind the cladding has to be sound. Cladding over rotten wood is a cosmetic fix that hides the rot for two winters and then fails with the eavestrough attached to it.

Wildlife is the surprise line on many soffit quotes, and it is a real one. A gap the width of a thumb at the soffit edge is an open door for a squirrel, and a squirrel in the attic chews wiring, compresses insulation and returns every spring. Wildlife-proofing reinforcement, metal screening and entry repair, runs $200 to $600, and it is money well spent on any house near trees. The other surprise is what the soffit hides. When the old soffit comes off, the roofer can finally see the rafter tails, the top of the wall, and the condition of the deck edge. Rotten rafter tails, carpenter ant damage and old wasp nests all live behind soffit, and any of them can add hundreds to the job. A good quote includes a contingency line for minor wood repair rather than discovering it mid-job.

Here is the decision rule. Replace the soffit and fascia together when either one is failing, because they share access, scaffolding and labour, and replacing one while the other rots beside it saves nothing. Replace rather than repair when rot covers more than a few feet, when the fascia is soft enough to push a screwdriver into, or when the eavestroughs are being replaced anyway, because the trough has to come off to do the fascia properly and the combined job is cheaper than two separate visits. Keep the existing soffit only if it is solid, vented, and the problem is a single damaged section. And always do this job before the eavestroughs, never after: our companion guide Eavestrough / Gutter Installation Cost in Canada explains why the trough hangs from the fascia, and a new trough on a rotten fascia is the most common way to pay twice. If ice dams are part of the story, read Ice Dam Removal and Prevention Cost in Canada as well, because blocked soffit ventilation is one of the quiet causes of ice dams, and fixing the ventilation is the permanent cure. Compare quotes with the RepairPrice home calculator at home-calculator.php, and ask each bidder to break out soffit, fascia, venting and wood repair as separate lines, because a single lump sum hides the venting, and the venting is the point.

Common questions:

How much does soffit and fascia replacement cost in Canada? HomeGuide puts the combined US job at $9 to $34 per linear foot, and EavesArmour prices 2026 Ontario work at $3 to $14 per foot for soffit and $4 to $18 for fascia, with a full aluminum eavestrough, soffit and fascia job at $4,500 to $8,500. Budget roughly $2,000 to $6,000 for soffit and fascia together on a typical house.

What is the difference between soffit and fascia? Soffit is the flat underside of the roof overhang, and fascia is the vertical board at the roof edge that the eavestroughs hang from. Soffit provides the attic's intake ventilation, fascia carries the eavestroughs and closes the roof edge, and the two are almost always replaced together.

Does soffit need to be vented? Yes, in most Canadian homes. Vented soffit is the intake half of attic ventilation, and the code ratio is at least 1 square foot of net free vent area per 150 square feet of attic floor. Solid soffit on a house that needs intake air traps moisture in the attic and rots the deck from the inside.

Can I replace fascia without replacing the soffit? You can, but it rarely makes sense. The two share access and labour, they fail together, and the eavestrough has to come off for either job. Replacing both at once is almost always cheaper than two separate visits.

JobTypical range (CAD)Notes
Soffit + fascia, per linear foot (combined)$15–$35Vinyl or aluminum; most Canadian cities
Fascia only, per linear foot$7–$22HomeGuide $5–$12 US; Angi avg $14.60 US
Soffit only, per linear foot$4–$22Width and material; vented panels at upper end
Typical house, complete$2,000–$6,000Roofline length, material, access
Wood fascia, per linear foot$20–$35Needs painting, traditional look
Vented soffit upgrade$300–$800 extraImproves attic ventilation; check NFVA
Wildlife-proofing reinforcement$200–$600Metal screening, entry repair

About the author

Oleksandr Potapenko

Oleksandr Potapenko β€” founder of RepairPrice, a Canadian price-transparency platform for car and home repairs, based in Edmonton, Alberta.

Check the fair price

See what this repair should cost for your car in seconds.

→

Check my quote

Got a number from a shop? Find out in 30 seconds if it is fair.

→

Related guides