Kitchen and Bathroom Sink Replacement Cost in Canada
By Oleksandr Potapenko · 2026-11-16 · How we research prices

A sink replacement is two different jobs wearing one name, and the price depends on which one you are buying. HomeGuide puts sink installation at 280 to 1,400 USD on average, including materials and labour: a new sink costs 50 to 750 USD alone, and replacement labour runs 230 to 650 USD. HomeAdvisor puts the average at 438 USD, with a typical range of 216 to 663 USD, and notes that a kitchen sink averages about 400 USD while a bathroom sink averages about 1,290 USD installed, because bathroom jobs more often include the vanity and the countertop. Converted at 1.39, the standard kitchen swap lands around 300 to 920 CAD, and the bathroom job higher. A basic stainless drop-in sink costs 100 to 250 USD for the unit, an undermount composite granite sink 200 to 500 USD, and a fireclay farmhouse sink 400 to 1,200 USD. There is no Canadian national series for sink replacement, so these converted US figures are checked against Canadian contractor reporting: a licensed plumber in the Vancouver area quotes 350 to 800 CAD for a straightforward like-for-like replacement, which matches the converted band.
The mount is the decision that sets the price. A drop-in, or top-mount, sink sits in a hole cut in the countertop with its rim resting on top. It is the cheapest to install, the easiest to replace, and the most forgiving of a countertop that is not perfectly flat. An undermount sink is glued and clipped beneath the countertop, so the edge of the stone is the edge of the sink: it looks cleaner and lets you wipe crumbs straight into the bowl, but it needs a solid-surface countertop, usually stone or quartz, and it needs a fabricator's support, not just a plumber's. A farmhouse, or apron-front, sink extends past the front of the cabinet, which means the cabinet itself has to be cut and reinforced. Switching from a drop-in to an undermount, or installing a farmhouse sink, requires cutting and finishing the countertop opening, which costs 200 to 500 USD on its own. If your countertop is laminate, forget the undermount entirely: laminate cannot support one and cannot be cut cleanly for one.
The hidden costs are the same ones that appear on every plumbing job, and they are worth naming before the quote. Removing the old sink adds 20 to 300 USD, and disposal another 20 to 300 USD, according to HomeAdvisor. Reconnecting the faucet, the drain, and the garburator is included in most labour quotes, but replacing the faucet at the same time is not, and neither is replacing the drain assembly or the supply lines. If the new sink is deeper than the old one, the drain height changes, and the trap may need to be lowered, which is a small job on its own. If the sink is a different size than the old cut-out, the countertop needs work, and that is where a 500 CAD job becomes a 1,500 CAD job. Ask the quote to state the sink model, the mount type, the cut-out work, the disposal, and the reconnections, each on its own line.
A bathroom sink has its own trap. The vanity is usually the constraint, not the sink. A vessel sink sitting on top of the counter looks striking and costs nothing extra to install, but it raises the rim height and can make the faucet too short to reach over it. An undermount bathroom sink in a stone top is the cleanest look and the most expensive to change later. A pedestal sink has no storage and no counter space, and replacing it means replacing the whole pedestal, not just the basin. The HomeAdvisor figure of about 1,290 USD for a bathroom sink installed reflects exactly this: the sink is rarely the only thing being replaced, and the vanity, the faucet, and the countertop travel with it.
The rule is simple enough to use in the showroom. Replace like-for-like when the countertop is sound and the cabinet is sound: a drop-in for a drop-in, the same cut-out, the same drain position, and the job is three to five hours and one plumber visit. Change the mount type, the size, or the position only as part of a countertop or vanity replacement, when the cutting and the finishing are already being paid for. And if the faucet is more than ten years old, replace it while the sink is out: the labour is already open, and a new faucet costs 100 to 250 USD for the fixture, which is cheaper than a second visit. Our guide Faucet Replacement and Installation Cost in Canada has the faucet numbers, and Garburator (Garbage Disposal) Replacement Cost in Canada covers the unit that usually gets reconnected at the same time. Check the combined total in the RepairPrice home calculator (home-calculator.php) before you order anything.
Common questions:
Q: How much does it cost to replace a kitchen sink in Canada?
A: A standard like-for-like swap runs about 300 to 920 CAD installed, based on HomeAdvisor and HomeGuide figures converted at 1.39. An undermount or farmhouse sink with countertop cutting runs 550 to 1,950 CAD or more.
Q: How long does it take to replace a sink?
A: Three to five hours for a straightforward swap. A full day if the countertop needs cutting, the drain needs moving, or the faucet and garburator are being replaced at the same time.
Q: Can I replace a sink myself?
A: A drop-in swap is a reasonable DIY job if the cut-out matches and the shut-offs work. An undermount or farmhouse sink is not: it needs countertop work, structural support, and a watertight seal that is hard to get right the first time.
Q: Is an undermount sink worth it?
A: For cleaning and appearance, yes, and it is the standard in mid-range and premium kitchens. But it needs a stone or quartz countertop, costs 200 to 500 USD more in cutting and fitting, and is much harder to replace later than a drop-in.
| Item | Typical range (CAD) | Notes |
|---|---|---|
| Bathroom sink fixture | 120β450 | Drop-in is usually cheapest to fit |
| Kitchen sink fixture | 200β800+ | Farmhouse and composite cost more |
| Labour: swap + reconnect | 300β600 | Drain, faucet and disposal reconnection |
| Stone cut-out enlargement | 400β1,000+ extra | Specialist work, priced per job |