Faucet Replacement and Installation Cost in Canada
By Oleksandr Potapenko · 2026-11-16 · How we research prices

Replacing a faucet looks like a one-hour job, and for a straight swap it nearly is. Angi puts new faucet installation at 100 to 575 USD, with a bathroom faucet replacement averaging about 270 USD. HomeAdvisor's faucet installation data runs in the same band. Converted at 1.39, the installed job lands around 140 to 800 CAD for the labour and a standard fixture, averaging about 375 CAD for a bathroom faucet and more for a kitchen. The fixture is the variable: Angi lists about 60 to 200 USD for a bathroom sink faucet, 100 to 250 USD for a kitchen sink faucet, and 60 to 400 USD for a bathtub faucet, with high-end materials and designs reaching 500 USD or more for the fixture alone. There is no Canadian national series for faucet installation, so these converted US figures are checked against Canadian plumber rates of 105 to 175 CAD per hour and Canadian retail: a 200 to 400 CAD fixture plus one to two hours of labour reproduces the same totals.
The first decision is not the faucet. It is the holes. A bathroom faucet comes in three configurations: single-hole, centreset with 4-inch spacing, and widespread with 8-inch spacing. A kitchen faucet is usually single-hole or three-hole, and a pull-down model needs clearance under the sink for the hose and the weight that retracts it. Measure the spacing and the number of holes before you shop, because a widespread faucet will not fit a centreset sink, and an adapter plate that covers unused holes looks exactly like what it is. The second decision is the finish, and it is a maintenance decision, not a style one. Chrome is the cheapest and the easiest to keep clean. Brushed nickel hides water spots. Matte black shows every drop of hard water and every fingerprint. Oil-rubbed bronze looks rich and ages visibly. Pick the finish for the water in your house, not for the photo in the showroom.
What makes a quote jump is access, and access is what nobody sees until the plumber is under the sink. The shut-off valves under the sink are the usual surprise: if they are seized or leaking, they need replacing, and that adds 50 to 200 CAD. Old supply lines should be replaced at the same time for the same reason: a braided stainless line costs 8 to 15 USD and a burst supply line is one of the most common causes of a flooded kitchen. Corroded mounting nuts under an old faucet can add half an hour of wrestling with a basin wrench. A faucet in a stone countertop with no existing hole needs a diamond hole drilled, which is specialist work. None of this is a reason to avoid the job. It is a reason to ask for the quote to state what is included: removal, new supply lines, new shut-offs if needed, testing, and cleanup.
Touchless and pull-down faucets deserve a separate word because they change the job. A pull-down kitchen faucet costs more for the fixture, 100 to 250 USD at the standard end and considerably more for a good one, and the installation is the same unless the hose needs a new hole. A touchless faucet needs power: either batteries, which need changing, or a plug-in adapter, which needs an outlet under the sink that may not exist. An electrician adding an outlet is a separate visit at a separate rate. Ask whether the price includes the electrical work before you fall in love with the sensor. The same applies to a faucet with a built-in water filter or a pot filler: the fixture is the cheap part of the decision, and the plumbing and power around it are the expensive part.
The repair-or-replace rule from our guide Leaking Faucet Repair Cost in Canada still applies, and it is worth repeating here because it is the whole decision. Repair when the valve body is sound and only the cartridge or washer is worn. Replace when the body is corroded, parts are discontinued, the faucet has already been repaired twice, or you want features the old one cannot give you, like a pull-down sprayer or a single-hole design. One more rule for the fixture itself: buy the faucet from a plumbing supply house or a reputable brand, not the cheapest listing online. Moen, Delta, and Kohler cartridges are stocked at every hardware store in Canada and carry lifetime warranties. A no-name faucet with a proprietary cartridge becomes unrepairable the day the seller stops answering emails. Get the installed price in writing, separate the fixture from the labour, and check the total in the RepairPrice home calculator (home-calculator.php). If the shower needs the same treatment, read Shower Valve and Cartridge Replacement Cost in Canada next.
Common questions:
Q: How much does it cost to replace a faucet in Canada?
A: Angi puts installation at 100 to 575 USD, about 140 to 800 CAD, with a bathroom faucet averaging about 375 CAD installed and a kitchen faucet more. The fixture adds 85 to 700 CAD depending on type and finish.
Q: How long does it take to replace a faucet?
A: One to two hours for a straight swap with working shut-offs. Add an hour if the shut-offs are seized, the mounting nuts are corroded, or a new hole must be drilled.
Q: Can I replace a faucet myself?
A: Yes, if the shut-off valves work, the new faucet matches your hole spacing, and you have a basin wrench. It is a two-hour job for a careful DIYer. Call a plumber if the shut-offs are seized or the supply lines are corroded.
Q: Are touchless faucets worth it?
A: For hygiene and convenience, many households like them. But they need power under the sink, batteries or an outlet, and the sensor and solenoid are more parts to fail. Budget for the electrical work, not just the fixture.
| Item | Typical range (CAD) | Notes |
|---|---|---|
| Bathroom faucet fixture | 80β300 | Single-hole or widespread |
| Kitchen faucet fixture | 120β500+ | Pull-down and touchless cost more |
| Labour: removal + install | 200β400 | Includes testing and cleanup |
| New shut-offs / supply lines | 50β200 extra | Worth doing while access is open |