Garburator (Garbage Disposal) Replacement Cost in Canada

By Oleksandr Potapenko · 2026-11-16 · How we research prices

Plumber installing a garburator unit under a kitchen sink

The garburator, known in the US as a garbage disposal, is the one kitchen appliance most Canadians buy by horsepower and regret by noise. Angi puts a professional replacement at 200 to 625 USD, averaging about 550 USD. HomeAdvisor's range is wider, 150 to 950 USD, averaging about 550 USD as well. Fixr puts the mid-range at 300 to 600 USD, averaging 500 USD. Converted at 1.39, the standard replacement lands around 280 to 870 CAD, averaging about 765 CAD. A first-time installation in a kitchen that never had one is a different job: 750 to 1,400 USD, or roughly 1,040 to 1,950 CAD, because it needs a new dedicated circuit, a GFCI outlet, and a switch. There is no Canadian national series for garburator replacement, so these converted US figures are checked against Canadian plumber rates of 105 to 175 CAD per hour: one hour of labour plus a 110 to 550 CAD unit reproduces the same band.

Horsepower is the number that matters, and it is also the number most often oversold. A 1/3 HP unit costs 50 to 120 USD and suits a single person or a couple who cook lightly. A 1/2 HP unit costs 80 to 170 USD and suits two to three people with regular cooking. A 3/4 HP unit costs 130 to 280 USD and is the sweet spot for most families: it handles daily cooking, grinds finer, and jams less. A 1 HP unit costs 150 to 400 USD and suits large families and heavy daily use. The important detail is that horsepower is not the whole story. A 3/4 HP unit with stainless steel grinding components and sound insulation will outlast and out-quiet a cheap 1 HP unit with galvanised parts. InSinkErator's Evolution series and Waste King's Legend series both illustrate the point: the premium is in the grinding chamber and the insulation, not the motor rating on the box. A quality unit lasts 10 to 15 years. A budget unit needs replacing in three to five.

The replacement itself is usually quick, and that is the good news. A like-for-like swap, same brand and same mount, takes about an hour, because the mounting assembly stays in place. InSinkErator to InSinkErator is a 30-minute swap. Switching brands means changing the mounting assembly, the drain connection, and sometimes the dishwasher drain hookup, which adds time and cost. Home Depot's installation program charges 97 to 339 USD for labour on a standard replacement, averaging 189 USD, which is consistent with the one-hour figure. What makes the job expensive is the electrical side. A garburator needs a dedicated 15-amp circuit with GFCI protection, and if the kitchen has no outlet under the sink, an electrician has to add one. That is a separate trade at a separate rate, and it is the reason a first-time installation costs two to three times a replacement.

Before you replace it, check whether it is actually dead. The most common garburator problem is a jam, not a failure: a bone, a bottle cap, or a piece of cutlery wedged between the impellers. Turn the power off at the switch, then use the hex key that came with the unit, or a 6 mm Allen key, in the socket at the bottom, and work it back and forth to free the jam. Then press the red reset button on the bottom. If it hums but does not spin, it is jammed. If it does nothing at all, check the breaker and the reset button before you call anyone. If it leaks from the top, the sink flange seal has failed. If it leaks from the bottom, the internal seals are gone and the unit is finished: no repair is worth doing on a leaking garburator body.

The decision rule is about the unit's age and the cost of the fix. A jam or a reset is free. A drain or flange reseal is a small job. But if the unit is over 10 years old, leaks from the body, or needs its second repair, replace it. Buy 3/4 HP with stainless components and sound insulation, in the 130 to 250 USD range, and stick with the same brand as the old unit so the mount fits. And know what not to put in it: no grease, no coffee grounds in quantity, no fibrous vegetables like celery and artichokes, no bones, no pasta and rice that swell. A garburator is a food-waste grinder, not a trash can, and most failures are user error with a receipt attached. Our guide Kitchen and Bathroom Sink Replacement Cost in Canada covers the sink it hangs from, and Faucet Replacement and Installation Cost in Canada covers the other half of the same cabinet. Check the total in the RepairPrice home calculator (home-calculator.php) before you book.

Common questions:

Q: How much does it cost to replace a garburator in Canada?
A: Angi puts a professional replacement at 200 to 625 USD, about 280 to 870 CAD, averaging about 765 CAD. A first-time installation with new electrical work runs about 1,040 to 1,950 CAD.

Q: What size garburator do I need?
A: A 1/2 HP unit suits two to three people; a 3/4 HP unit is the sweet spot for most families at 130 to 280 USD. Go to 1 HP only for large families with heavy daily use. Stainless grinding parts and sound insulation matter more than raw horsepower.

Q: Can I replace a garburator myself?
A: Yes, if it is a like-for-like swap with an existing outlet and the same mounting assembly: about an hour for a careful DIYer, with the power off at the breaker. Call a pro if there is no outlet, if the brand is changing, or if the drain needs modifying.

Q: Why is my garburator humming but not spinning?
A: It is jammed. Turn the power off, work the hex key in the bottom socket back and forth to free it, then press the red reset button. If it still does nothing, check the breaker. If it leaks from the bottom, the seals are gone and the unit needs replacing.

ItemTypical range (CAD)Notes
Standard garburator unit150–4501/2 to 3/4 HP covers most homes
Quiet / high-power unit400–700+Sound insulation, stainless parts
Labour: swap + test250–450Like-for-like is cheapest
New outlet or drain changes200–600 extraElectrical work by a licensed electrician

About the author

Oleksandr Potapenko

Oleksandr Potapenko β€” founder of RepairPrice, a Canadian price-transparency platform for car and home repairs, based in Edmonton, Alberta.

Check the fair price

See what this repair should cost for your car in seconds.

→

Check my quote

Got a number from a shop? Find out in 30 seconds if it is fair.

→

Related guides