Electrical Panel Upgrade Cost: 100A to 200A in Canada

By Oleksandr Potapenko · 2026-11-16 · How we research prices

Electrician installing a new 200 amp electrical panel in a home

A panel upgrade is the one electrical job where the price you are quoted can honestly be $2,000 or $9,000 for what sounds like the same work, and both numbers can be right. The difference is scope: swapping the breaker box in place is one job, and replacing the whole service from the street is another. HomeAdvisor's 2026 data puts the American average for a panel replacement at $1,347, with a typical range of $518 to $2,193, and a 100-amp to 200-amp upgrade at $750 to $2,000 when no new circuits are added. Angi's 2026 report is broader, at $1,300 to $4,000 for a standard residential upgrade, with complex jobs past $5,000. Converted at about 1.40 Canadian dollars per US dollar, the HomeAdvisor 100-to-200-amp range becomes roughly $1,050 to $2,800 in Canadian dollars, which is well below what Canadian contractors actually charge, and that gap is the first thing to understand: Canadian labour rates, permit regimes and utility rules push the real Canadian price higher than a straight currency conversion suggests.

The Canadian numbers tell a consistent story once you line them up. RenoQuotes' 2026 guide puts a typical 100-amp to 200-amp residential upgrade at $2,000 to $4,500 before tax, with a basic like-for-like panel replacement starting around $1,500 to $2,500 and a full 200-amp service at $2,500 to $6,000. Blaze Estimating's Canadian calculator gives $2,000 to $5,500 in most provinces, with British Columbia and major metros at $3,500 to $8,000. Eagle Power in Vancouver quotes $4,200 to $6,000 for a 200-amp panel replacement with limited service work, and $9,000 to $12,000 for a complete 100-amp to 200-amp service change including a new meter base, larger service conductors and mast work. Energo Electric in Etobicoke publishes $3,900 to $4,800 plus HST for most 100-amp to 200-amp upgrades, permit included. The honest Canadian planning range is therefore about $2,500 to $6,000 for a typical upgrade, with full service changes in expensive cities reaching $9,000 to $12,000. If your quote is $1,800, ask what is missing; if it is $11,000 in a small town, ask why.

What you are actually buying is capacity, and the numbers are simple. A 100-amp service at 240 volts delivers about 24 kVA; a 200-amp service delivers about 48 kVA, double the headroom. A 100-amp panel handles a stove, a dryer, air conditioning and lights, but it gets tight the moment you add an EV charger, a heat pump or a hot tub. Most homes built after 2000 already have 200-amp service, which is why the upgrade question mostly belongs to owners of older houses. The panel itself is only part of the job: the meter base, the service mast or riser, the grounding and bonding, the permit and the inspection all sit on the same invoice, and the utility may need to inspect the meter base or disconnect the service while the work is done. A new 200-amp panel on a 100-amp service does not give you 200 amps, a point Eagle Power stresses, because the service conductors and the meter still limit what the house can draw.

Before you approve an upgrade, ask for a load calculation under Canadian Electrical Code Rule 8-200. It is the calculation that decides whether you need 200 amps at all, and it is also the calculation that can save you the money. A load-management device, sometimes called an EV energy management system, costs roughly $1,000 to $1,200 installed according to Blaze Estimating, and it lets a 100-amp home add an EV charger by pausing the charger when the stove or dryer is running. For many households that is the right answer, and RenoQuotes notes the same alternative explicitly. The decision rule: upgrade to 200 amps if you are adding two or more big loads at once, if breakers trip regularly, if the panel is a recalled Federal Pacific or Zinsco unit, or if the service is still 60 amps. Buy load management if the only new load is one EV charger and the rest of the house is fine.

Permits and inspection are not optional. In Ontario the ESA permit and inspection are mandatory for panel work, and unpermitted work can void home insurance. In Quebec homeowners are legally prohibited from replacing their own panel, and in British Columbia the work needs a permit through Technical Safety BC or the municipality. Get three written quotes that each list the panel brand, the breaker count, the meter and mast work, the permit and the inspection, and compare them line by line. Our guide EV Charger (Level 2) Installation Cost in Canada explains the load that most often triggers this upgrade, and Hot Tub Electrical Circuit Cost in Canada covers the other common trigger. For a rough budget before you call anyone, the RepairPrice home calculator (home-calculator.php) gives a fair range for your city.

Common questions:

Q: How much does it cost to upgrade from 100 amps to 200 amps in Canada? A: RenoQuotes puts a typical residential upgrade at $2,000 to $4,500 before tax, and Blaze Estimating gives $2,000 to $5,500 in most provinces, with BC and major metros at $3,500 to $8,000. A complete service change in Vancouver runs $9,000 to $12,000. Plan on $2,500 to $6,000 for a typical job.

Q: Is upgrading to 200 amps worth it? A: Yes if you are adding an EV charger, a heat pump or a hot tub, if breakers trip regularly, or if the service is 60 amps or a recalled panel brand. No if the only new load is a single EV charger and the house is otherwise fine; a load-management device at about $1,000 to $1,200 installed often does the same job for a fifth of the price.

Q: Do I need a permit to upgrade my electrical panel? A: Yes, in every province. In Ontario the ESA permit and inspection are mandatory, in Quebec only a licensed master electrician may do the work, and in BC the permit comes through Technical Safety BC or your municipality. Unpermitted panel work can void your home insurance.

Q: How long does a panel upgrade take? A: The electrical work itself is usually one day, with the power off for several hours while the panel is swapped. The full timeline is longer because the permit, the utility coordination and the inspection have to be scheduled around it, so allow a week or two from quote to final inspection.

JobTypical range (CAD)Notes
Panel swap, same amperage1,500–4,000No added capacity
100A to 200A service upgrade2,500–6,000Panel, mast, meter, permits, inspection
Full service change, major metro9,000–12,000Vancouver pricing; meter and mast work
Load management device (alternative)1,000–2,500May avoid a full upgrade for EV charging

About the author

Oleksandr Potapenko

Oleksandr Potapenko β€” founder of RepairPrice, a Canadian price-transparency platform for car and home repairs, based in Edmonton, Alberta.

Check the fair price

See what this repair should cost for your car in seconds.

→

Check my quote

Got a number from a shop? Find out in 30 seconds if it is fair.

→

Related guides