Vinyl Plank Flooring Installation Cost in Canada
By Oleksandr Potapenko · 2026-11-16 · How we research prices

If you buy vinyl plank by looking at the photograph on the box, you will buy the wrong floor. Two planks can show the same oak picture, cost $2 per square foot apart, and last ten years apart. The difference is not the picture. It is the wear layer — a transparent skin measured in mils — and the core underneath it. Learn those two numbers and the rest of the quote makes sense.
The wear layer is the whole durability story in one number. A mil is one-thousandth of an inch, and for residential vinyl plank the meaningful range runs from 6 mil to 30 mil. A 6- to 8-mil wear layer belongs in a rental or a room nobody uses. A 12-mil wear layer, the standard on most mid-grade click-lock planks, suits bedrooms and low-traffic areas. A 20-mil wear layer is the right pick for kitchens, entries, and homes with dogs — it is the single most common recommendation across the 2026 cost guides, and it is where the price steps up. A 20- to 30-mil layer is commercial territory. Here is the rule that saves people money: a thin 4-millimetre plank with a 20-mil wear layer will outlast a thick 10-millimetre plank with a 6-mil wear layer every time. Plank thickness is mostly about feel and sound underfoot; wear-layer thickness is about how many years the picture survives. Check the warranty fine print for pet and commercial exclusions, because a "25-year warranty" that excludes pet damage is not a 25-year warranty for your house.
The core is the second number. Standard LVP has a flexible vinyl core. WPC, wood-plastic composite, is thicker, softer, and quieter underfoot, and it hides minor subfloor imperfections better. SPC, stone-plastic composite, is the rigid core that has taken over Canadian basements: it is denser, more dimensionally stable in temperature swings, and fully waterproof. SPC costs roughly 50 percent more than standard LVP, according to the 2026 pricing data compiled from HomeGuide and Angi, and for a basement or a house with big seasonal temperature changes it is money well spent. All three cores are waterproof as a material — the planks themselves will not swell the way laminate does — but water can still reach the subfloor through seams and edges if a leak goes unnoticed for days, so "waterproof floor" is not the same as "leak-proof house."
On price, the sources agree more than they disagree, and the disagreement is instructive. HomeGuide's 2026 guide puts luxury vinyl plank at $4 to $16 US per square foot installed, with most residential mid-range projects landing at $6 to $10 US. Angi publishes a broader $2 to $22 US, which is a band so wide it mostly tells you that Angi is counting everything from peel-and-stick budget tile to commercial glue-down. The labour split is where the two install methods diverge: click-lock floating labour runs $1.50 to $4 US per square foot, while glue-down labour runs $3 to $8 US — roughly double for the same square footage, because glue-down is slower, messier, and far less forgiving of a subfloor that is not perfectly flat. Materials sit at $2 to $7 US per square foot depending on core type, and underlayment adds $0.30 to $0.80 US unless the pad is factory-attached to the plank.
The Canadian figures, as always, carry the same honesty note: there is no single Canadian national price series for vinyl plank, so the ranges below are estimates converted from the verified American figures above at 1.40 Canadian dollars per US dollar, checked against Toronto-area contractor pricing. Converted, HomeGuide's $4 to $16 US becomes roughly $5.60 to $22.40 Canadian, but the Toronto cross-check pulls the realistic band much tighter: GMC Construction's 2026 Toronto guide lists luxury vinyl plank at $5 to $10 Canadian installed, Parqueteam lists click-lock vinyl at $5 to $9 Canadian and glue-down at $6.49 to $8.49 Canadian, and Floorrable's Toronto labour-only rate for click-together floating floors is $2.25 Canadian per square foot. A realistic Canadian planning range is $5 to $11 per square foot installed for standard click-lock work, $2,500 to $5,500 for 500 square feet, with premium rigid-core SPC and glue-down commercial work reaching $8 to $14. The top of HomeGuide's American range reflects high-end SPC and commercial jobs, not what a typical Canadian kitchen costs.
Why has vinyl plank become the default floor for Canadian basements, kitchens, and rentals? Three reasons, and they are all Canadian. First, it goes over concrete, which rules out solid hardwood and worries laminate. Second, it handles radiant heat well, which matters as in-floor heating spreads. Third, it survives the mudroom test: snowmelt, road salt, wet boots, and a dog coming in from a February walk. It is also softer and quieter underfoot than laminate, which is why it has taken over bedrooms in condos where the strata worries about noise. The weaknesses are real too. Vinyl cannot be refinished — when the wear layer is gone, the floor is gone, and its realistic life is 20 to 30 years against 50-plus for hardwood. Heavy furniture and dropped pans can dent it, and cheap thin planks telegraph every bump in the subfloor. That last point decides more quotes than people expect: vinyl shows subfloor imperfections that carpet would hide, so levelling is often a separate line of $1 to $3 US per square foot when the floor varies more than an eighth of an inch over six feet, according to Angi's data.
Compare before you commit. Against laminate — our guide "Laminate Flooring Installation Cost in Canada" — vinyl costs a little more but is genuinely waterproof and lasts longer in wet rooms. Against hardwood — "Hardwood Floor Installation Cost in Canada" — vinyl is half the price and a third of the worry, but it adds no resale value and cannot be refinished. Against tile — "Tile Floor Installation Cost in Canada" — vinyl is warmer underfoot, far cheaper to install, and the right call everywhere except a shower room. Confirm the quote includes levelling, underlayment if required, transitions, and baseboard work, and run your room sizes through the RepairPrice home calculator (home-calculator.php) with a 5 percent waste allowance before you order.
Common questions:
How much does vinyl plank flooring cost to install in Canada? Typically $5 to $11 Canadian per square foot installed for click-lock work, or $2,500 to $5,500 for 500 square feet. HomeGuide's 2026 American range of $4 to $16 US converts higher at the top, but Toronto guides from GMC Construction and Parqueteam cluster at $5 to $10 Canadian for standard residential jobs.
How long does vinyl plank flooring last? ConsumerAffairs puts vinyl at about 25 years on average, and the 2026 cost guides give 20 to 30 years. The deciding factor is the wear layer: a 20-mil layer in a kitchen will outlast a 12-mil layer in the same room by years.
Is vinyl plank flooring waterproof? The planks themselves are fully waterproof — the PVC or stone-plastic core does not absorb water the way laminate's fibreboard core does. But water can still reach the subfloor through seams if a leak goes unnoticed, so wipe up standing water and fix leaks promptly.
Can you install vinyl plank over tile or existing flooring? Often yes, if the existing floor is flat, stable, and low enough not to cause problems at doors and transitions. Click-lock planks float over tile and old vinyl; glue-down needs a smoother base. The subfloor still has to be flat — vinyl telegraphs bumps that carpet would hide.
| Option | Typical range (CAD) | Notes |
|---|---|---|
| Installed, per sq ft | $5–$11 | Material $3–$7, click-lock standard |
| Click-lock LVP, 12-mil wear layer | $5–$8 | Bedrooms, low traffic |
| Rigid-core LVP, 20-mil wear layer | $8–$11 | Kitchens, entries, pets |
| 500 sq ft area | $2,500–$5,500 | Before levelling |
| Glue-down commercial | $8–$14 | Higher labour, very durable |