Trim and Baseboard Installation Cost in Canada

By Oleksandr Potapenko · 2026-11-16 · How we research prices

Carpenter installing white baseboard trim along a freshly painted wall

Take a tape measure around one average room. A 12 by 12 foot bedroom has about 44 linear feet of wall once you subtract the door opening. At $6 to $9 a foot installed, that room costs roughly $265 to $400 for the baseboard alone. Add the door casing, the caulking, and the paint, and you are at $400 to $600 before anyone has touched a second room. That single measurement is the whole pricing model for trim work: everything is sold by the foot, and the foot is mostly labour.

Angi puts professional baseboard installation at $5.70 to $9 per linear foot for materials and labour in its 2026 data, with a national average project cost of $1,100 and a range of $750 to $3,000. HomeGuide's current data lands in the same place, around $6 to $9 per linear foot. Homewyse's September 2026 estimator starts higher, at roughly $9.26 to $14.17 per foot for its modelled professional installation, because it assumes a fuller scope with painting and a higher-grade profile. The disagreement is useful rather than confusing: Angi and HomeGuide price a basic painted job, Homewyse prices a finished one. Converted at 1.40 Canadian dollars per US dollar, the Angi range becomes roughly $8 to $12.60 CAD per foot, but Canadian trim is usually priced in Canadian dollars to begin with, and the converted figure should be treated as a cross-check rather than a quote.

The material itself is the cheapest part of the job. Angi lists MDF baseboard material at $1 to $1.40 per foot, pine at $1.40 to $1.85, poplar at $1.90 to $2.50, maple and oak at $2.50 to $5, and cherry and mahogany at $4.50 to $10. PVC runs $0.90 to $1.40. Labour is $5 to $7.75 per linear foot according to Angi, which is why the carpenter's time, not the trim, is the biggest line on the bill. Each additional quarter inch of baseboard height adds $0.25 to $0.50 per foot. Painting adds another $1 to $6 per foot, and removing old baseboard runs $50 to $100 per labour hour. A do-it-yourselfer buying material only pays $0.80 to $1.20 per foot, according to Angi, which is why trim is one of the most tempting DIY jobs in the house and one of the easiest to get visibly wrong.

Height changes the price more than most people expect. A standard 3 and a quarter inch profile is the cheapest to buy and the fastest to install. A 5 and a half inch profile runs about $3.25 to $7 per foot for the material alone, and a tall, built-up profile with a cap moulding can double the labour because every piece has to be cut, fitted, and caulked twice. The visual payoff is real: taller baseboards make a room with eight-foot ceilings look finished in a way that a short, builder-grade strip never does. But if the budget is tight, spend the money on one tall profile in the rooms people actually see, and keep the standard height in bedrooms and closets.

Material choice in Canada is a moisture decision. MDF is affordable and paints beautifully smooth, but it swells if it gets wet, so keep it out of bathrooms, mudrooms, and anywhere snowmelt pools near the door. Solid pine or hardwood costs more but handles moisture and dents better, and it can be sanded and refinished instead of replaced. Pre-primed trim saves a painting step; raw wood needs priming and two coats for a durable finish. PVC trim is the practical answer for a bathroom or a basement, because it cannot swell at all.

Corners and transitions are where cheap work shows, and they are the first thing to look at when you compare two quotes. Inside corners should be coped, not simply mitred, so the joint stays tight as the wood moves with the seasons. Outside corners need a clean mitre with no gap and no filler showing. Ask how the installer handles the transition where baseboard meets door casing, and whether the quote includes caulking the top edge and filling nail holes. A quote that is $2 a foot cheaper and skips the caulking will look worse on day one than the expensive quote looks on day one hundred.

The decision rule is a tape measure and an honest look at your mitre saw. If the job is one room, the walls are straight, and you own or can borrow a mitre saw and a brad nailer, DIY is reasonable: material is under $60 for a bedroom, and the worst mistake is a gap you can caulk. Hire a pro if the job is a whole house, the walls are old and wavy, the profile is tall or built up, or the trim has to match existing casing in the rest of the house. A whole-house trim replacement in a typical home runs $3,000 to $8,000 or more, and at that scale the labour savings of a pro who cuts each piece once are worth more than the material savings of doing it yourself.

Before you accept a quote, confirm whether it includes removal of the old trim, the material, the paint or stain, caulking and nail-hole filling, and cleanup. Ask whether casing is priced per door or included, and whether the price is per linear foot of wall or per linear foot of trim supplied, because those are different numbers on a room with a lot of doors. Get two quotes for anything over $1,000. You can check the total against the RepairPrice home calculator (home-calculator.php). If the trim is part of a fresh-paint project, see Interior Painting Cost in Canada, and if new doors are going in at the same time, How Much Does Interior Door Installation Cost in Canada? covers the door side of the job.

Common questions:

How much does it cost to install baseboards in Canada?
Expect roughly $6 to $12 CAD per linear foot installed for standard MDF or pine, based on Angi's 2026 US range of $5.70 to $9 per foot converted at 1.40, with Canadian material prices in the same band. A single average room typically totals $400 to $1,200 including material, labour, caulking, and painting, and a whole house runs $3,000 to $8,000 or more.

Is MDF or wood baseboard better?
MDF is cheaper and paints smoother, but it swells when wet, so it belongs in dry rooms only. Solid pine or hardwood costs more and handles moisture and dents better, and it can be refinished. PVC is the best choice for bathrooms and basements because it cannot swell at all.

Can I install baseboards myself?
Yes, for a single room with straight walls, if you have a mitre saw and a brad nailer. Material alone is $0.80 to $1.20 per foot, according to Angi. The hard parts are inside corners, which should be coped, and long runs on wavy walls. A whole house, tall profiles, or matching existing trim is a job for a finish carpenter.

How much extra is painting the trim?
Painting baseboards costs an additional $1 to $6 per linear foot, according to Angi, or $2.36 to $4.97 per foot in Homewyse's September 2026 painting model. Pre-primed trim saves a coat, and raw wood needs a primer plus two coats for a durable finish.

JobTypical range (CAD)What moves the price
Baseboard, MDF, installed per linear foot$5–$8Profile height, painting
Baseboard, hardwood, installed per linear foot$9–$12Species, stain vs paint
One average room, complete$400–$1,200Room size, casing included
Door casing, per door$100–$250Profile detail, paint
Whole house trim replacement$3,000–$8,000+House size, material

About the author

Oleksandr Potapenko

Oleksandr Potapenko β€” founder of RepairPrice, a Canadian price-transparency platform for car and home repairs, based in Edmonton, Alberta.

Check the fair price

See what this repair should cost for your car in seconds.

→

Check my quote

Got a number from a shop? Find out in 30 seconds if it is fair.

→

Related guides