Hardwood Floor Refinishing Cost in Canada
By Oleksandr Potapenko · 2026-11-16 · How we research prices

There are three different jobs hiding inside the phrase "refinishing a hardwood floor," and they cost very different amounts. Confusing them is how homeowners end up paying for a full sanding when a light refresh would have done, or expecting a cheap recoat to fix damage that only sanding can reach. Get the service level right first, and the price almost sorts itself out.
Level one is a screen and recoat. The contractor scuffs the existing finish with a fine abrasive screen, vacuums, and rolls on one fresh coat of polyurethane. No bare wood is ever exposed, the stain underneath stays exactly as it is, and the job is often done in a day. Fixr prices screening at $1 to $2.50 US per square foot and recoating at $1 to $2 US, which sums to roughly $2 to $4.50 US per square foot for the bundle. This is the right call when the finish looks dull and tired but the colour is still even and there is no bare wood showing. It is the wrong call the moment you can see grey, worn-through patches β a new coat will not bond to bare wood the same way, and it will peel.
Level two is the full sand and refinish, and it is what most people mean. The floor is sanded down to bare wood in several passes, then stained if you want and sealed with two or three coats of finish. This is the most agreed-on number in the trade: NerdWallet, HomeAdvisor, and Bob Vila each publish exactly $3 to $8 US per square foot, and This Old House, Fixr, and Inch Calculator print the same range. HomeAdvisor's project data puts the typical whole job at $1,107 to $2,681 US, with a national average of $1,892 US, while Fixr's lower national average of about $1,200 US reflects a smaller 200-square-foot job rather than a whole main floor. Homewyse sits at the top of the published range at $6.64 to $8.10 US per square foot as of September 2026, which is what you should expect for a floor in rough shape or a high-cost city.
Level three adds a stain colour change, and it costs more for a real reason: the floor must be sanded perfectly evenly, because any leftover old stain shows through the new colour like a shadow. HomeGuide puts stain-inclusive refinishing at $3 to $8 US per square foot, and a dedicated stain-change job at $4 to $11 US. Always ask for a test patch on a closet floor or under a radiator before committing to a dark stain β dark colours show every sanding mark and every speck of dust the crew missed.
Now the Canadian side, and the usual honesty note: there is no single Canadian national price series for refinishing, so the Canadian figures below are estimates converted from the verified American ranges above at 1.40 Canadian dollars per US dollar, checked against published Toronto-area pricing. Converted, $3 to $8 US becomes roughly $4.20 to $11.20 Canadian per square foot. The Toronto cross-checks sit comfortably inside that band: General West Contractors lists sanding and refinishing in the GTA at about $3 to $6 Canadian per square foot, HardwoodHub's Toronto guide puts a full sand and refinish at roughly $3.50 to $12 Canadian depending on area and condition, and a Toronto refinisher quoted by LV Flooring puts the same $3 to $8 range in Canadian dollars for typical jobs. A realistic Canadian planning range is $5 to $9 per square foot for a standard full refinish, or $2,500 to $4,500 for 500 square feet, with screen-and-recoat work at roughly half that. Dustless sanding, where the sander captures dust at the source, runs $5 to $8 US per square foot according to Bob Vila and Fixr β worth it if anyone in the house has asthma or the rooms cannot be sealed off well.
The decision that matters most is not which finish to pick but whether your floor can be sanded at all. Solid hardwood can usually be sanded several times over its life β five to ten, depending on board thickness. Engineered hardwood depends entirely on the thickness of its top veneer: a 4-millimetre wear layer may survive two or three light sandings, a 2-millimetre layer may survive one, and a veneer under 2 millimetres may not survive even one full sanding. Here is the rule: before any contractor promises a full sand, ask them to measure the veneer at a floor vent cutout or a threshold, in writing. If they will not measure, get a second opinion. If the veneer is too thin, the honest options are a screen and recoat, which removes no wood, or replacement β and replacement is where our guide "Hardwood Floor Installation Cost in Canada" picks up, with engineered hardwood at $8 to $14 Canadian installed. Floors with large gaps, cupping from moisture, or movement in the boards need repair first, which is the territory of "Subfloor Repair and Replacement Cost in Canada": sanding a floor that moves underneath it is money thrown away.
Plan for the disruption honestly. Furniture must leave the rooms entirely, not just shift to one side, because the sander needs the whole floor. You stay off each coat overnight, for two to three coats, so a main floor is out of use for three to five days. Oil-based polyurethane costs more, smells stronger, and gives a warm amber tone that deepens over time; water-based finish dries faster, smells less, and resists yellowing, which is why it dominates Canadian jobs now. In winter, the house must stay warm enough for the finish to cure β a cold house in January is the most common reason a refinish fails. Between refinishings, felt pads under furniture, rugs at entries, and a maintenance recoat every few years in high-traffic areas will stretch the interval to 10 to 15 years. Run your own square footage through the RepairPrice home calculator (home-calculator.php) and compare the refinish total against a new floor before you decide.
Common questions:
How much does it cost to refinish hardwood floors in Canada? A standard full sand and refinish runs about $5 to $9 Canadian per square foot, or $2,500 to $4,500 for 500 square feet. HomeAdvisor's American average of $1,892 US converts to roughly $2,650 Canadian for a typical whole job, and Toronto contractor guides cluster at $3 to $6 Canadian per square foot in the GTA.
Is it cheaper to refinish or replace hardwood floors? Yes, by a wide margin. Refinishing costs $3 to $8 US per square foot according to HomeAdvisor, Bob Vila, and NerdWallet, against $6 to $25 US for new hardwood installation. For a 500-square-foot floor that is roughly $1,500 to $4,000 to refinish versus $4,000 to $8,500 to replace.
How many times can hardwood floors be refinished? Solid hardwood can usually be sanded five to ten times over a 50- to 100-year life. Engineered hardwood is limited by its wear layer: a thick veneer allows one to three sandings, a thin veneer under 2 millimetres may allow none. Measure the veneer before booking.
Can you change the stain colour when refinishing? Yes, but it is a full sand to bare wood plus extra sanding passes, priced at $4 to $11 US per square foot by HomeGuide's components. Ask for a test patch first, because dark stains expose every sanding imperfection.
| Job | Typical range (CAD) | What moves the price |
|---|---|---|
| Refinishing, per sq ft | $5β$9 | Condition, stain change, finish |
| Screen and recoat, per sq ft | $3β$6 | Finish only, no sanding to bare wood (Fixr components) |
| 500 sq ft area | $2,500β$4,500 | Standard sand + 2β3 coats |
| Board replacement, per board | $50β$150 | Species match, access |
| Stain colour change | $500β$1,500 extra | Extra sanding, test samples |
| Stairs refinishing | $1,000β$2,500 | Steps, railings, detail |