Weatherstripping and Draftproofing Cost in Canada
By Oleksandr Potapenko · 2026-11-16 · How we research prices

Draftproofing is the cheapest energy upgrade in a Canadian house, and the one most people skip because the savings are invisible. You cannot see a draft the way you can see a new window, but you feel it every January. The US Department of Energy and ENERGY STAR both put the payoff in the same place: sealing air leaks and adding insulation can cut heating and cooling costs by about 15 percent on average, and air sealing alone is usually the first recommendation in an EnerGuide report because it is cheap, fast and permanent. HomeGuide prices whole-house air sealing at 800 to 2,500 US dollars, and Angi's 2026 data puts the same work in the same band. A door weatherstripping kit, installed, is a 100-to-300-dollar job in Canadian terms, and a tube of caulk is the cheapest tool in the house.
A note on the numbers: Canada has no single national price series for this work, so the Canadian ranges below are estimates. They start from verified US figures published by HomeAdvisor, Angi, HomeGuide and Fixr, converted at about 1.40 Canadian dollars per US dollar, and are cross-checked against Canadian contractor listings and provincial program figures where those exist.
A blower-door test is the honest starting point, and it costs roughly 300 to 500 Canadian dollars, often bundled into a home energy audit. The test depressurizes the house and measures exactly how leaky it is, in air changes per hour, so you stop guessing. Without it, people caulk the windows they can see and miss the attic hatch, the rim joists and the recessed lights, which is where most of the air actually escapes. Warm air rises, so the leaks that matter most are at the top of the house in winter: the attic hatch, the plumbing and wiring penetrations into the attic, and the gaps around the chimney chase. The second tier is the basement rim joist, where the framing meets the foundation. Windows and doors, the leaks everyone notices first, are usually third.
The materials are simple and the differences between them matter. Foam tape is cheap and easy, but it compresses and needs replacing every few years. V-strip, also called tension seal, is a folded metal or plastic strip that springs against the door or sash, lasts far longer, and suits windows that open and close daily. Door sweeps close the gap at the bottom of exterior doors, where a surprising amount of cold air enters, and a silicone or polyurethane caulk outlasts cheap latex outdoors. For the attic hatch, a rigid insulated cover with a foam gasket beats a roll of weatherstripping every time, because the hatch is a hole in your ceiling the size of a door. Expect a professional to charge 150 to 400 Canadian dollars for an attic hatch seal with an insulated cover included.
The rule for deciding between doing it yourself and hiring it out is simple: if you can reach it with a caulk gun and a ladder, do it yourself, and spend the saved money on the blower-door test. If the job means crawling through a low attic, foaming rim joists or sealing around a chimney, hire it out, because the safety and fire-code details matter and the labour is only a day. Either way, do the air sealing before you add insulation. Insulation slows heat moving through materials; it does almost nothing against air moving through gaps, and burying a leak under new insulation just hides it. That order is the single most common mistake in Canadian retrofit work, and it is the reason our guide "Attic Insulation Cost in Canada" starts with sealing. Run the numbers through the RepairPrice home calculator (home-calculator.php) and read "Home Energy Audit Cost in Canada (EnerGuide)" before you spend a dollar on materials, because an audit tells you where your leaks actually are.
Common questions:
How much does draftproofing cost in Canada? A door kit installed runs about 100 to 300 Canadian dollars, window caulking about 15 to 40 dollars per window, and whole-house air sealing about 1,100 to 3,500 dollars, converted from HomeGuide and Angi US figures at about 1.40.
Does weatherstripping really save money? Yes. ENERGY STAR and the US Department of Energy estimate that sealing air leaks and adding insulation can cut heating and cooling costs by about 15 percent on average, and air sealing is usually the cheapest part of that saving.
What is a blower-door test? A fan mounted in a doorway depressurizes the house so an auditor can measure how leaky it is and find the leaks. It costs roughly 300 to 500 Canadian dollars and is often bundled with an EnerGuide audit.
Should I seal the house before adding insulation? Yes, always. Air sealing comes first, because insulation does almost nothing against air moving through gaps, and burying a leak under new insulation only hides it.
| Job | Typical range (CAD) | What moves the price |
|---|---|---|
| Door weatherstripping kit, installed | $100β$300 | Seal type, door condition |
| Window caulking, per window | $15β$40 | Access, old caulk removal |
| Whole-house air sealing | $1,100β$3,500 | House size, leak severity |
| Blower-door test | $300β$500 | Often bundled with audit |
| Attic hatch sealing | $150β$400 | Insulated cover included |