Deck Repair and Re-Staining Cost in Canada
By Oleksandr Potapenko · 2026-11-16 · How we research prices

A deck rarely dies all at once. It fades, greys, splinters and softens in one corner first, and the question is whether a repair and a fresh coat of stain will buy you five more good years or whether you are throwing money at framing that is already rotten. In Canada, a professional clean and re-stain runs about $3 to $8 per square foot, so a standard 300-square-foot deck costs roughly $900 to $2,400, according to Vancouver deck contractors and HomeStars pricing. Board replacement runs $300 to $1,200, a railing section $500 to $1,500, and structural repair to posts, framing or stairs $1,000 to $4,000 or more.
The per-square-foot number hides the real cost driver, which is preparation. A deck that only needs washing and two coats of stain sits at the low end, around $3 to $5 per square foot. A deck with peeling solid stain or paint needs chemical stripping first, and EngineerFix puts stripping at an extra $1.50 to $3.00 per square foot. Heavy sanding adds $2 to $4 per square foot for sanding and staining combined. That is why two quotes for the same deck can differ by a factor of two: one contractor priced a wash and stain, the other priced a full restoration. Ask each bidder to state exactly what prep is included, and get it in writing.
Stain itself is cheap; labour is not. EngineerFix notes that a gallon of deck stain costs $20 to $50 and covers 200 to 300 square feet, so materials for a 300-square-foot deck run roughly $60 to $180 for a do-it-yourselfer, while a professional job for the same deck runs $900 to $2,400 because of washing, prep, two coats and the crew's time. The do-it-yourself saving is real, but only if the deck is structurally sound and you have two dry days in a row. Stain applied to damp wood or in direct hot sun peels within a season, which is the most common do-it-yourself failure in this trade.
The inspection matters more than the stain. Walk the deck with a screwdriver and push it into the ends of boards, the ledger board where the deck meets the house, and the bottom of every post. Soft wood that the screwdriver sinks into means rot, and rot in the ledger or in joists is a structural repair, not a cosmetic one. Vancouver deck contractors put repair and structural restoration at $500 to $8,000 or more depending on how much framing is gone. If the ledger is rotten, the deck can pull away from the house, and that is a safety issue, not a maintenance item. A deck that bounces, leans or has posts sitting on soil instead of concrete footings should be assessed by a builder before anyone talks about stain colour.
Timing is a Canadian problem. Stain needs the wood dry and temperatures above about 10 degrees Celsius, with no rain for 24 to 48 hours. That gives most of the country a window from late May to early September, and the best results come from staining in mild, overcast weather rather than in a heat wave. Pressure-treated wood needs re-staining every one to two years in Ontario's climate, according to Working With Wood, while cedar needs it every two to three years. Composite decking, by contrast, needs no staining at all, which is worth remembering when you price a repair against the cost of a new deck in "How Much Does Building a Deck Cost in Canada?".
The decision rule: repair and re-stain when the framing is solid, the rot is limited to a few surface boards, and the deck is under about 12 years old. Rebuild when the ledger or joists are soft, when more than a third of the boards need replacing, or when the repair quote passes half the cost of a comparable new deck. The same 50 percent rule that garage door technicians use applies here. Before you sign, check the quote against the RepairPrice home calculator (home-calculator.php), and ask the contractor whether the price includes washing, brightener, two coats, and cleanup of the stain drips on the siding, because those are the line items that turn into surprise extras.
Common questions:
How much does it cost to stain a deck in Canada?
A professional clean and re-stain runs about $3 to $8 per square foot, so a 300-square-foot deck costs roughly $900 to $2,400. Stripping an old failing finish adds $1.50 to $3.00 per square foot, according to EngineerFix.
How often should I stain my deck?
Pressure-treated wood needs re-staining every one to two years in Ontario's freeze-thaw climate, and cedar every two to three years, according to Working With Wood and cedar deck builders in Toronto. Composite decking never needs staining.
Can I stain my deck myself?
Yes, if the framing is sound. Materials cost roughly $60 to $180 for a 300-square-foot deck, according to EngineerFix, but the wood must be dry and rain-free for 24 to 48 hours, and stain applied in hot sun or on damp wood peels quickly.
When should I repair instead of replacing my deck?
Repair when the framing and ledger board are solid and only a few boards or a railing section are damaged. Rebuild when the ledger or joists are rotten, the deck bounces or leans, or the repair quote passes half the cost of a new deck.
| Job | Typical range (CAD) | What moves the price |
|---|---|---|
| Clean and re-stain, per sq ft | $3β$8 | Prep, stripping, number of coats |
| 300 sq ft deck, re-stain total | $900β$2,400 | Condition, stain type, railings and stairs |
| Chemical stripping of old finish, per sq ft | $1.50β$3 extra | Peeling solid stain or paint |
| Replace individual boards | $300β$1,200 | Board count, framing condition |
| Railing section replacement | $500β$1,500 | Material, length |
| Structural repair (post, framing, stairs) | $1,000β$4,000+ | Extent of rot, access |