Paintless Dent Repair Cost in Canada

By Oleksandr Potapenko · 2026-11-16 · How we research prices

A technician gently pushing out a small dent on a car door with specialized rods and a reflection board

A one-inch dent costs $125 to fix. That is the starting price Dented, a Calgary paintless dent repair specialist operating since 2005, publishes on its own price list, and it is the most useful number in this whole guide because it anchors everything else. From that $125 starting point, Dented prices a minor dent of one to two inches at $125 to $200, hail and stone damage at $50 to $125 per dent with multi-dent pricing, collision dents at $150 to $300, and creased panels at $200 to $350. A Calgary PDR pricing guide from Calgary Paint Protection Film gives the same shape in slightly higher numbers: a small door ding up to one inch at $125 to $175, a medium golf-ball-sized dent at $200 to $350, a large dent of four inches or more at $400 to $800 and up, and a crease or body-line dent at $250 to $600. Most Calgary PDR shops also carry a shop minimum of about $150, which is why fixing two small dings in one visit is almost always cheaper per ding than fixing them separately.

The reason PDR is so much cheaper than a body shop is that it skips the most expensive part of bodywork entirely: paint. A technician works the dent out from behind the panel with steel rods, or pulls it from the outside with glue tabs, massaging the metal back to its original shape without sanding, filler or repainting. Simplicity Collision Centres, a Canadian collision chain, puts PDR at $75 to $500 for small dents and notes it typically costs 40 to 60 percent less than conventional repair, while a traditional body shop repair for a single door ding in Calgary often starts at $500 to $800 because the whole panel must be painted to match. The factory paint stays on the car, which matters twice over: there is no colour-matching risk on pearl or tri-coat finishes, and the car keeps its original paint, which buyers and vehicle history reports both reward at resale.

Not every dent qualifies, and the eligibility test is the decision rule for this guide. PDR works when two conditions hold: the paint is not cracked, and the back of the panel is accessible. Dented lists the disqualifiers plainly: a complex or deep dent, crumpled or twisted metal, deeply scratched or cracked paint. Simplicity adds dents with sharp creases, damage along body lines, areas near structural reinforcements, and damage at a panel edge. Aluminium panels are a special case: the metal is stiffer and has less memory than steel, so the Calgary guide notes a 25 to 50 percent surcharge on aluminium, which covers most hoods, tailgates and doors on recent Ford F-150s, Teslas and many Audis. If the metal has been stretched beyond its elastic limit, no amount of massaging will bring it back, and the honest answer is a conventional repair.

The per-panel framing in many price guides is slightly misleading, and it is worth understanding before you compare quotes. PDR is really priced per dent, by size, depth and count, and a panel with five hail dents costs more than a panel with one door ding. That is why hail work is quoted per vehicle rather than per panel, and why our companion guide Hail Damage Repair Cost in Canada (PDR vs Insurance) prices a full hail restoration separately. For a single parking-lot ding, expect $125 to $350 at a specialist, one to four hours of work, and the car back the same day. A traditional shop needs the car for days. If your insurance deductible is $500, a single PDR ding is almost always cheaper out of pocket than claiming, and most PDR specialists offer free photo estimates by text or email, so you can get a number before you drive anywhere.

Ask the shop three things before booking. First, are they VALE-certified or equivalent, and do they guarantee the dent will be invisible from a normal viewing distance? Second, is the price per dent or per panel, and what happens if they start the job and find the metal is stretched? Third, will they tell you honestly if the dent is not a PDR candidate instead of attempting it and charging you anyway? A good PDR technician turns work away. Use the RepairPrice calculator (calculator.php) to check the quote against a fair price for your vehicle, and if the paint is cracked or the dent is creased, get a conventional body shop quote as well so you are comparing the real alternatives.

Common questions:

Q: How much does paintless dent repair cost in Canada? A: Dented in Calgary starts at $125 for a one-inch dent, with minor dents at $125 to $200 and creased panels at $200 to $350. A Calgary pricing guide puts a medium golf-ball dent at $200 to $350 and a large dent at $400 to $800 or more. Most shops have a minimum of about $150, and PDR typically runs 40 to 60 percent less than conventional bodywork, according to Simplicity Collision Centres.

Q: Can paintless dent repair fix any dent? A: No. The paint must be uncracked and the back of the panel must be reachable. Sharp creases, dents on body lines or panel edges, crumpled metal and cracked paint are not eligible. Aluminium panels cost 25 to 50 percent more because the metal is stiffer and has less memory than steel.

Q: Is PDR better than a traditional body shop repair? A: For an eligible dent, yes: it is cheaper, faster, usually same-day, and it preserves the factory paint, so there is no colour-matching risk. For a dent with cracked paint or stretched metal, a traditional repair is the only option, and PDR cannot help.

Q: Will insurance cover paintless dent repair? A: A single door ding is usually cheaper than your deductible, so most drivers pay out of pocket. Hail damage is different: it is a comprehensive claim, and insurers prefer PDR because it preserves factory paint. See our guide Hail Damage Repair Cost in Canada (PDR vs Insurance) for the claim rules.

JobTypical rangeWhat moves the price
Small dent, 1 inch (Dented starting price)$125–$200From $125 per dent; shop minimum ~$150
Medium dent, golf-ball size$200–$350Depth and access behind the panel
Large dent, 4 inches or more$400–$800+Metal stretch, aluminium surcharge 25–50%
Crease or body-line dent$250–$600Sharp crease takes far longer to work out
Hail damage, whole car$1,500–$8,000+Per dent count across all panels; often insured
Not eligible for PDR$500–$1,500+ per panelSharp crease, cracked paint, stretched metal β€” conventional repair

About the author

Oleksandr Potapenko

Oleksandr Potapenko β€” founder of RepairPrice, a Canadian price-transparency platform for car and home repairs, based in Edmonton, Alberta.

Check the fair price

See what this repair should cost for your car in seconds.

→

Check my quote

Got a number from a shop? Find out in 30 seconds if it is fair.

→

Related guides