Car Rust Repair Cost in Canada
By Oleksandr Potapenko · 2026-11-16 · How we research prices

Roman Auto, a rust repair shop serving Sackville, Amherst and Moncton in New Brunswick, publishes the clearest rust repair price list in Canada, and it is tiered the way the work actually is. A cosmetic patch starts at $300. A section repair, cutting out the affected rocker and welding in new metal, starts at $600. A full outer rocker panel replacement starts at $1,200, plus up to about $300 depending on the paint finish. Structural rocker and floor repair typically runs $1,600 to $3,000 and more, and the scope is confirmed only after inspection, because additional damage is often discovered once repairs begin. Those four numbers, from a real shop in the salt belt, are more useful than any national average, because they show the exact moment a rust job jumps from cheap to expensive: the moment the metal has to be cut.
EngineerFix, an automotive repair cost guide, gives the same shape in broader bands. Minor surface rust, sanded and treated by a professional, runs $50 to $200 for a small area. Moderate rust, where the metal has begun to flake or bubble and a panel must be cut and welded, runs $300 to $800 per panel. Severe or structural rust, on frames, rocker panels, floorboards or suspension mounts, runs $1,000 to $3,000 and more, and a full panel replacement on a truck can reach $1,500 to $4,000 per side. The two sources disagree on the low end because they are pricing different things: EngineerFix's $50 to $200 is a small spot sanded and touched up, while Roman Auto's $300 starting price is a proper cosmetic patch with paint blending. Both agree on the expensive end, and both agree that structural rust is where a car gets written off economically.
The first thing to learn is how to tell which kind of rust you have, because the price follows the depth, not the size of the stain. Surface rust is orange discoloration on top of the paint or just under it, with the metal still solid underneath. Press it with a screwdriver and it feels hard. Scale rust is flaking metal with partial thickness loss; the surface feels rough and layered. Penetrating rust is a hole, or metal so thin you can push through it with a screwdriver, and it is almost always worse inside than outside, because rust starts inside rocker panels and wheel arches where water and salt collect, and eats outward. A bubble under the paint on a wheel arch is never just a bubble: it is the visible tip of corrosion that has already eaten through from the inside. Any shop that quotes a rust repair without poking the area and checking the inside of the panel is guessing.
The decision rule the industry uses is the 50 percent rule, cited by EngineerFix: if the total repair cost exceeds half the car's current market value, the investment is usually not prudent. Check the value on Kelley Blue Book or a Canadian equivalent before you authorize a $2,000 rocker repair on a car worth $3,500. There is a second rule for structural rust: if the frame, subframe, floor pan or suspension mounting points are perforated, the car is a safety problem, not a cosmetic one, and it should not be driven until it is repaired or retired. A rocker panel is structural on most unibody cars; it is part of the crash structure, not a trim piece. A cheap fix here is dangerous: a filler skim over rust, the cheapest option on every price list, bubbles again within a year because the rust underneath keeps growing, and it hides the damage from the next buyer and the next inspection.
Where you get the work done matters as much as what is done. A proper repair cuts out all the rusted metal, welds in a new patch or panel, seals the back side of the repair against moisture, and paints with blending into adjacent panels. Ask the shop to show you the cut-out metal, ask whether they treat the inside of the panel with a cavity wax or oil, and ask for a written warranty on the repair. A shop that offers a lifetime warranty on its welding, as several guides recommend demanding, is a shop that trusts its own work. Get the estimate in writing with the scope stated as conditional on what is found once the panel is opened, because Roman Auto is explicit that structural scope can only be confirmed after inspection. And compare the repair against prevention: an annual oil spray at $120 to $200, detailed in our guide Rust Proofing and Undercoating Costs in Canada, is the cheapest rust money you will ever spend, and it is most effective when started before the first bubble appears. Use the RepairPrice calculator (calculator.php) to check the quote against a fair price for the severity you have.
Common questions:
Q: How much does it cost to fix rust on a car in Canada? A: Roman Auto in New Brunswick lists a cosmetic patch from $300, a weld-and-patch section repair from $600, a full rocker replacement from $1,200, and structural rocker and floor repair at $1,600 to $3,000 or more. EngineerFix puts moderate panel rust at $300 to $800 per panel and structural rust at $1,000 to $4,000 or more.
Q: Can rust be repaired, or is the car finished? A: Surface and moderate rust can be repaired properly by cutting out the bad metal and welding in new metal. Penetrating structural rust on a frame or floor can be repaired, but it is expensive, and the 50 percent rule applies: if the repair costs more than half the car's value, it is usually not worth it.
Q: How do I know if rust is structural? A: Press the area with a screwdriver. If the metal is solid, it is surface rust. If it flakes, crumbles or you can push through it, it is penetrating rust. Rocker panels, frame rails, floor pans and suspension mounts are structural areas; a bubble on a wheel arch usually means corrosion has already eaten through from the inside.
Q: Is a filler skim over rust a real repair? A: No. Filler over rust is the cheapest and shortest-lived option: it bubbles again within a year because the rust underneath keeps growing. A real repair cuts out the rusted metal, welds in new metal, seals the back side, and repaints.
| Rust severity | Typical range | What it involves |
|---|---|---|
| Surface rust, per area | $150β$800 | Sand, treat, fill, repaint; small spot $50β$200 |
| Wheel arch / rocker panel patch | $600β$2,000+ per panel | Cut out, weld new metal, paint; cosmetic patch from $300 |
| Structural rust (frame, subframe, floor) | $1,600β$4,000+ | Welding, alignment, component replacement |
| Annual rust proofing (prevention) | $120β$200 | Far cheaper than any repair above |
| Filler skim over rust | Cheapest, shortest-lived | Bubbles again within a year |